Intelligent Remote Control Hit Nest Boat Bait Boat

Ⅱ Technical Specifications

Ⅲ Package Contents

1. One fishing bait boat

2. One remote control

3. One lead-acid battery of 12V 9AH

4. Eight Ni-HM batteries of 1.2V 1500MAH

5. One lead-acid battery charger of 15V 1.5A

6. One  Ni-HM charger of 15V 500MA

7. One antenna

8. One backpack

9. One manual

10. Foam boxes

11. One carton

Ⅳ Operating Instructions

1. Please open the battery cover in the middle of the boat, and Join the power cord and then close the battery cover.

2. Please connect the antenna. Please make sure it is tightened, or the reception may be affected.

3. Please put all the Ni-HM batteries into the remote. Be aware of the place of anode and cathode. After fully knowing how to operate the remote, you may power it on. The operations are as follows:

A. Power indicators. Green light on means the remote has enough power and can work in fully order. Red light flashing means you need to return the boat and charge the remote.

B. Left lever. It controls the hook and bait door.

↑↓Release the hook. ←→Open the bait door.

C. Power switch.

D. Remote antenna.

E. Right lever. It controls the movements of the boat.

↑ Forward. ↓ backward. ← Turn left in place. → Turn right in place. ↖ Move toward left front.↗ Right front.↙ Bottom left.↘ Bottom right.

F. Remote ring. It helps you gain more flexibility in operations.

The operations of bait boat are as follows:

A. Indicator lights. It helps you find the boat over a long distance. When the boat is moving forward, white lights are on.

B. Cover of  lead-acid battery.

C. Air hole.

D. Signal indicator lights. Blue lights mean good reception,while lights flashing means unstable and no lights on no signal.

E. Battery capacity display. PF-1: red, yellow and green lights from left to right. PF-2: red and green lights. All lights on means the battery is fully charged. Green light is flashing when lack of power. Red light on suggests you charge the battery.

F. Grass guard. It prevents the boat from grass and other debris.

G. Hook keeper. It pulls the hook , and release it by remote.

H. Hopper. PF-1: one hopper with 2 kg’s capacity. PF-2: two hoppers,2 kg’ s capacity each.

J . Signal receiving antenna. Tighten it before the boat is used.

K. Power switch.

L. Battery charge interface.

M. LED indicator. White light flashes when the hopper opens.

N. LED indicator. Blue light flashes when hook drops.

P. LED indicator. It flashes when the hook or hopper on the left side moves.

Q. LED indicator. It flashes when the hook or hopper on the right side moves.

Ⅴ Charging Method

  One Charger for Ni-HM batteries used in remote,15V500mA,and one for lead-acid battery used in boat,15V1.5A. Please Don’t mix.

 Charger for Ni-HM batteries

When the red light of remote flashes,please charge the Ni-HM batteries. Before charging, please make sure all the batteries are well put and connected and the remote is switched off. When the red light turns into green,which will take 3 to 4 hours, the batteries are fully charged.  

2 . Charger for lead-acid battery

Before charging, please make the boat is switched off. When the red light turns into green,which will take 4 hours, the battery is fully charged.